Home
Product Directory
Electrical & Electronics
Telecommunication & Broadcasting
Communication Module
Good Price and Great Discount 10g SFP+ CWDM 1270-1610nm Optical Module Optical Transceiver
US$28.00-35.00 | 1 Piece (MOQ) |
Port:
Qingdao, China
Production Capacity:
1000PCS/Month
Payment Terms:
L/C, T/T, Western Union, Paypal
Shandong Wanshuo Optoelectronic Equipment Co., Ltd.
Shandong, China
Last Login Date:
Jun 25, 2025
Business Type:
Manufacturer/Factory, Trading Company
Main Products:
EDFA, Optical Amplifier, Optical Transmitter, Optical Receiver, FTTH Optical Receiver, Outdoor Optical Receiver, CATV Amplifier, Optical Module
Find Similar Products
Product Description
Company Info
Basic Info.
Model NO.
SFP10G-CWDM-10
Condition
New
Centre Wavelength
1270~1610nm
Laser off Power
-30dBm
Transmission Distance
10km
Power Supply Voltage
3.3V
Trademark
wseelaser
Transport Package
Carton
Specification
57.5*14.3*12.7mm
Origin
Shandong
HS Code
8517622990
Product Description
The CWDM DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km. This transceiver consists of two sections: The transmitter section incorporates a CWDM DFB laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Electrical Characteristics (TOP(C) = 0 to 70 ºC, TOP(I) =-40 to 85 ºC,VCC = 3.13 to 3.47 V)
Optical Characteristics (TOP(C) = 0 to 70 ºC, TOP(I) =-40 to 85 ºC,VCC = 3.13 to 3.47 V)Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Differential data input swing | VIN,PP | 180 | 700 | mVpp | 1 | |
Transmit Disable Voltage | VD | VCC-0.8 | Vcc | V | ||
Transmit Enable Voltage | VEN | Vee | Vee+0.8 | |||
Input differential impedance | Rin | 100 | Ω | |||
Transmit Disable Assert Time | 10 | us | ||||
Receiver | ||||||
Differential data output swing | Vout,pp | 300 | 850 | mVpp | 2 | |
Output rise time and fall time | Tr, Tf | 30 | Ps | 3 | ||
LOS asserted | VLOS_F | VCC-0.8 | Vcc | V | 4 | |
LOS de-asserted | VLOS_N | Vee | Vee+0.8 | V | 4 | |
Power Supply Rejection | PSR | 100 | mVpp |
Notes:
- Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
- Into 100 differential termination.
- 20 - 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1's and four 0's sequence in the PRBS 9 is an acceptable alternative.
- LOS is an open collector output. Should be pulled up with 4.7k - 10k on the host board. Normal operation is logic 0; loss of signal is logic 1.
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter | ||||||
Operating Wavelength | λ | λ-6.5nm | λ+6.5nm | nm | 1 | |
Ave. output power (Enabled) | PAVE | -6 | 0 | dBm | 2 | |
Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
Extinction Ratio | ER | 3.5 | dB | |||
Spectral width | Δλ | 1 | nm | |||
Transmitter and Dispersion penalty | TDP | 3.2 | dB | |||
Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
Receiver | ||||||
Operating Wavelength | λ | 1270 | 1610 | nm | ||
Receiver Sensitivity | PSEN | -14.4 | dBm | 3 | ||
Input Saturation Power(Overload) | PAVE | -3 | dBm | |||
Receiver Reflectance | Rrx | -12 | dB | |||
LOS Assert Power | Pa | -30 | dBm | |||
LOS De-assert Power | Pd | -17 | dBm | |||
LOS-Hysteresis | Phys | 0.5 | dB |
Notes:
- The wavelength λ =1270nm~1610nm, Total 18 wavelengths,20nm spacing
- Measured at 10.3125b/s with PRBS 231 - 1 NRZ test pattern.
- Under the ER worst =5, measured at 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12
Send your message to this supplier
People who liked this also liked